Recent content by johnfitzy

Similar to your other post... check that the "firmware version property" of this camera contains "R6"... it so, you should be fine upgrading straight to the latest version V5.5.82 release 190909 found on the link you posted.

That does look like the correct link since your current version is listed there before the new one... to be sure, look at the "firmware version property" of your camera... Does it contain "R0"? Here's an example from a "R7" series camera... There probably wouldn't have been a newer version...

Same here, installed and all good!

Hi @J273 ... this probably won't help because I have a DS-7616NI-M2/16P on V5 firmware... here is where an alarm host is setup on that model:

Here's an example of a goto preset 2 command run... ignore the ":65008" at the end of my IP address... that's there because I am accessing a camera on an NVR PoE port using virtual host:

A possible solution? Unfortunately, this assumes you have a PC running 24/7... You can use the following curl/ISAPI commands to send the camera to presets 1 and 2: curl.exe -u USERNAME:PASSWORD --digest -X PUT "http://IP_ADDRESS//ISAPI/PTZCtrl/channels/1/presets/1/goto curl.exe -u...

I checked the specs for your camera and I see there is no "Scheduled Task" capability listed :( ... like this... If the camera had "Scheduled Task" capability you would see this menu item:

I agree... and @trempa92 gives lots of help here... he does get a bit cranky sometimes though :) ... and I think this is the correct answer in a nutshell: If you check you will probably see the cameras are recording, you just can't live view them all due to the decoding capability. Merry...

I was testing the Dropbox link to make sure it works... if you don't have a Dropbox account, and don't want one, just click on "Or continue with download only" and you can download the zip file without having to create a Dropbox account:

Howdy folks... I have created this Windows utility... A, B, Y, X buttons select camera Right joystick controls pan/tilt Left joystick controls zoom Dpad up/down controls focus Dpad left/right controls iris Camera presets can be selected using the other buttons as set in the utility...

The DS-76xxNI-M2 series NVR product pages no longer show the latest firmware... I suspect we have seen the last firmware updates for these :( So much for "HOT" :)

Not really, I could see staying on V4.

Still not, but there is the alarm pop up window... not as good functionality as V4 "full screen": No... here's where GREAT MINDS THINK ALIKE... or we're the only two users who care it was a good timeout... hard to believe :( No change here either... not a pet peeve of mine, but the...

It's been a while since I tried, but I seem to remember being able to use Hik-Connect to set an Ez-Viz camera up from scratch... It's really up to a new/recent user to try and see what happens now :)

I have/had several different Ez-Viz models... they all seem to have different features supported by the Hikvision protocol. I would try starting over and re-activating/connecting to Wi-Fi using the Hik-connect app... then use iVMS4200 to configure any settings (like auto tracking) that are not...