Recent content by nwgreplica

hello, i have a DS-7616NXI-I2s e with firmware Firmware__V5.04.020_241107_S3000611035. the problem is when i activate the microphone in live view on the recorder, it disable the sound after random time interval. in the recorded stream there is audio even when on the liveview the audio channel is...

hello dan, i have a question about iDS-2CD7A46G0-IZHSY, the inteligent part of this camera is this regulated by the nvr or does the camera it self? i want to buy this camera for the face recognition. but does my recorders support this camera/face recognition? it a DS-7716NI-I4. there are some...

thanks dan, i wil give it a try

thanks again dan for the quick reply . no, it is even not working in the nvr local gui!! so thats a bit of a issue. in advanced options of image settings at the roi section i also can select enable dynamic face tracking but no show on the nvr. how is it possible that the camera has no vca or...

dan, i took a look at the history of the firmwares of the DS-2CD2T55FWD-I5 camera's i found a remark in the releasnote of version V5.6.0 G1, G1+M. it says, Face detection picture can be displayed on NVR local live view. i added the pdf file . so it looks like face detection is suported in this...

the answer of hikvision is to simple, buy a other camera of the 7 series!!! if they exchange the camera for my 2 or 4 line model for free its ok to me. hikvision is selling a product with a function that you need (face detection) and you buy the camera for that function (but is does not work (...

same story over here. nvr and camera supports face detection but not working, i think it is a firmware issue of the camera/nvr because it worked in the past on my nvr/camera setup. after a update of the nvr/camera face detection stopped. and support of hikvision is not that fantastic for the end...

hi dan, i have a issue about face detection. i have a DS-7716NI-I4 running firmware V4.50.010_210322, in combination with a DS-2CD4B26FWD-IZS Firmware_V5.5.91_210429 and a DS-2CD2327G1-LU firmware 5.6.5_200316. both cameras have face detection, option is selectable in nvr gui and camera gui...

after updating to this firmware, facedetection is not working any more on all of my camera's!!! i have a few camera's that displays in the firmware facedetection enable. but when i activate the facedetion on de nvr, it say this function is not available/supported!! anyone more with this problem...

thanks again for the answer dan the strange thing is that the recorder claims that on some of the camera's that have facedetection, it gives the message function not supported!! but if i check the the camera interface the function is supported. vca is enabled on the camera's. and if i check...

yes, same model switch, the only different between the 2 camera's is that the one that works correct dont use the infrared at night (daytime setings 24h) the other camera with the issue switch from day to night settings, so maybe with the ir on to much power draw? stil thinking about distance...

the nvr dont have poE ports. the camera is directly connected to a 1 gb poe switch a the camera side. then the signal goes from the poe switch at the camera side to the switch at the nvr side. the connection between the switches is a non-poE 1gbit connection. on the poE switch are 3 camera's...

i have one last issue with the anpr camera: i got 2 anpr camera's both the same model DS-2CD4A26FWD-IZHS. one camera works fine. the other i have to reboot every 2 or 3 days because it stops recording the plates. after a reboot it works fine. could it be a problem of the length? the camera that...

thanks Dan, i upgrade the camera. after a factory reset the firmware works fine. do you know if there is a changelog whats new/improved/fixed in this firmware? I also have a other qestion Dan, i have camera's that support facedetection but it dont work at all or very bad. on most of the...

fin, do you have a link for that firmware? i am running DS-2CD4A26FWD-IZHS with firmware V5.4.5 build 170302 and also want to update to V5.4.5 build 201106 so that i have anpr function and the new interface. thanks.