Recent content by SeanJ

....just jumping in to say i have x2 ANPR cams and struggled with poor angles and regular motion detection misses if the object/vehicle shot past quickly etc and my native software (hik) wasn't producing the result i wanted, For me this changed overnight using BlueIris and now my system is...

Hi, i use 2 ANPR Cams to monitor my busy road and eventually realised what they missed (due to motion detection not activating if the subject moved too fast) was often more than they were capturing so I moved over to Continuous recording. Now with everything being captured I of course have to...

thanks anyway Dan, this was resolved by the latest firmware, it had only gone up a few (small end number) increments since i last updated it a short while ago but that was enough to stop it being able to use IVMS for whatever reason The companion cam is on way older firmware (about to be...

Hi, Camera: iDS-2CD7A26G0/P-IZHSY (same model as other cam working fine localy on ivm4200) IVM4200 = V3.12.0.7 build 20240925

Hi, I'm having trouble adding a 2nd ipcam to ivm4200 despit having them both on a few weeks ago, i can view both independently on browsers using local ip address but only one of them is accepted after finding them online within ivm4200. There is a message (also in pic) that says 'OEM device...

I got it working, TFFT. Stupidly I hadn't checked thoroughly as the legacy page I initially got steered towards (in good faith) was the Netherlands portal and seeing EU on the page i thought I was in the right place but I just realised there was a UK equivelant and i'm now getting the updates...

One last update if anyone reading this might be able to suggest what to try next (that i havn't bored to death already!) So today I took one of the 2 cams down from it's tree location and etherneted it straight into the back of my router along with my laptop also etherneted into the router so...

Oh that's a shame, good suggestion though. The state of play here is despite using an ethernet lead and selecting the unzipped digidav files files from my root directory I still get the mismatch error constantly.Since reseting these 2 cams manually a month or so ago i seem to no longer be able...

Well it's clear i cannot update my firmware on either cam on any pc i have despite having done this in the past. It seems after resetting each cam a month or so ago that for whatever reason and following the update procedure and file number updates that i just keep getting the message 'the type...

It turns out I'm also having problems trying to update the firmware in the other cam as well, it's a bit higher in release number but it's not accepting the next update above it. I get the odd 'check the network' error when it looks the file is starting to upgrade. I am doing this all on my...

info attached, many thanks

Hi, yes i do follow the steps in the link above exactly as set out. I've been fine with my other (similar) cam in applying new firmware (though not as far back in date) but after a reset on this slightly older cam (same model) i've been struggling for a couple of months now. . J'm trying to...

I've had no luck despite repeatedly trying unfortunately. I tried the suggestion of no1 (V5.8.10_221025) which I can see is the next sequential number available above my existing firmware (V5.7.80 build 230712) but just get the 'The type of upgrade file mismatches' error each time. I did try...

thank you so much kyle, you're a star!

Hi, I'm searching for some legacy firmware for a Hik iDS-2CD7A26G0/P-IZHSY with out much luck for a cam on v5.7.80 and i'm trying to get to latest: (v5.8.60..) version. I read on the Hik pages you should ascend in steps to higher firmware and you can't jump up quickly, my version seems fairly...