Search results

i am buying always the 4gb version because i may use them for something else in future and have problems due lack of ram :) but for rtsp viewer ONLY you can go with 2GB ... should be no problem... omxplayer uses the hardware encoder for h264... even for mediacenter use most buy 2GB the rpi 3...

Depends... I see the raspberry solution as an addon to have a monitor to watch. Its easy to install, for someone who have experience in unix systems it would take only a few minutes to setup , if you no experience it takes maybe a few hours. if you just want the nvr away and you are able to...

https://community.spiceworks.com/how_to/123787-raspberry-pi-powered-surveillance-camera-monitoring-display https://community.ui.com/questions/Tutorial-Raspberry-Pi-3-RTSP-Stream-Viewer/cc54f892-b8d6-46c5-81f3-ee58b9284889 had run it several times for 24/7 monitoring... works like charm for...

@John Carr mcafee firewall problems with a device connected to a hik nvr and own wifi ? seems legit :rolleyes: lol

@LeeBow if you have another (!) poe switch which you can connect to the to your router AND with display/outdoor station... do it ! after you connect everything, you have to do a little bit of setup on the intercom devices. all on indoor station: 1. disable wifi on indoor station 2. go to...

@John Carr Nice. Then help the op with the disconnection problem. you will find the solution ;)

@John Carr The problem is, that you dont understand the point. In the video he is using WIFI and NVR POE LAN, like the op. You connect your device to 2 networks, which may cause many problems. One is wifi anyway, which may ends in more problems. there is no need for anything like that. you...

@John Carr Nope. The poe ports of the nvr has their own network (default 192.168.254.0/24). It is not reachable from outside and everything in the network cannot reach the outside. only if you enable virtual host function, there will be a static route from the poe ports to your network. but the...

@John Carr how does the internet connection to hikconnect work, if you have no virtual host and static route and connect it directly to the nvr ? the poe network of hik nvr is independent from your local network... i.e. no internet

... That is maybe the cause of your problem. Not only power is delivered... you connect the display to the network of the NVR i.e. the second (poe) network. You also connect it to your network via wifi... the display has an 12V power-supply port if you dont want to use poe-lan. but you should...

If you see any possibility connect it to a LAN Port, do it... it will avoid alot headache. never use wifi on any ip camera or similiar. it will never work good and it is also a big security flaw.

@NoFate hope you have luck. me as customer only get not helpful answers... ;) but kyle contacted them ... and they also said that they plan update to change ringtone.. maybe light at the end of the tunnel ;)

@NoFate on huawei phone you can change notification behaviour for all apps different. so you can set tone, vibrate (on/off/scheme), if you want banner , lockscreen .... and you can do it for each different type ... there could be many ... see screens and the example of whatsapp (which have MANY...

@Plumie thanks for you reply. Last time it seemed to be a Samsung bug only, but this could be a bias, cause many people are using Samsung phones. According to my tests and people from ipcamtalk it is 100% working on 4.14.1 if you have any internet connection. Have you tried to kill hikconnect...

@Kyle i did a quick test when i was home ! its not working... its even worse now with version 4.16 its clear now that they mess around with the notification system of the call system... see the notification banner style 4.14.1 vs 4.16.0 4.14.1 4.16.0 i found an easy way how to test if...

@Kyle Today there is a new version available... Version 4.16.0.0706(125) Released 2021-07-07 i will test soon !

@Kyle I was wrong. I was using an older version of hik-connect to get notifications back, where the phone settings of "vibrate only" were overridden. it seems to be fixed in 4.14.1 with working notifications on standby working on 4.14.1 and 4.15.1: - do not disturb (screen stays off, no...

@Phil yes the button gives only a summary of how disable battery saving aka shut down after a while. it was already tested by 2 users on ipcamtalk forum, who have same problem with 4.15.1 ... same settings (battery saving disable) and only version 4.14.1 is working. i have same issue on my...

please downgrade to 4.14.1 ... i know it might be unsafe to install apks from the internet... but hikvision dont have old version online ... :( (you have to remove 4.15.1 first , then install 4.14.1) it should then works again like normal (with annoying ringtone) here...

PLEASE REMOVE THE SCREEN WITH THE DEVICES SERIAL NUMBERS ! i think (must be not true) you have something complete wrong with your network settings. maybe you use a wrong configurated repeater or have several routers/accesspoints connected together and the devices can not communicate with each...