Search results

Update - have tried configuring the terminals both manually and via ivms. Reset to defaults etc... Multimeter confirms electrical connection between RS485+/RS485-. Would anybody have any suggestions as to why these terminals are not communicating with each other, or do I need to turn another...

I've installed two Min-Moe terminals to control a single mag lock. I'm using RS485 between them with one configured as card reader, one as access controller. I can't get the module which is acting as a card reader to open the door via the access controller. I've checked the Rs485 wiring (blue...

I have bell wire coming to an old doorbell. In an ideal world, I'd like to use that and not have to try and fish CAT6 (or anything) back through the property! Corner plate - I think some 3D printing might be needed, it's certainly something needed with these units

Similarly, is there a 45 degree mounting plate for corner mounting?

Bumping this - there must be a connector out there to fit the terminals, for use without the RJ45plug?

Consulting the collective experience of the group - what is, in your eyes the most secure way to stream to the web. I know I could setup an axis camera and run something like the cam streamer application, but the site is already littered with HikVision cameras, it makes more sense to try with...

As noted in another thread, I downgraded the firmware, and the device came back on network. I can't explain it!

And we have a solution! I dropped a version from what I was installing on the SD card, and downgraded the firmware. Don't ask me how.... it just reappeared!

No, haven't been able to pick it up on SADP. It's a very strange one. Can confirm the firmware needs removed from zip file to be recognised by camera

Have been trying this, this afternoon to sort the firmware on a DS-KV6113 which has disappeared from network after firmware upgrade. It seems to upgrade from SD card ok, but cannot get it back on the network

I am having a similar issue. Uploaded firmware 2.2.53. Doorstation rebooted and didn't come back online on network. Have tried a few things including a reset, can't get it to show on network. Any ideas?

I have a DS6113 reclaimed from a previous install. Have no PoE to new location, so will use 12V + Wifi. Does anybody know the part no. of the connector used to access the terminals? It looks like a mini jst, but I can't find confirmation anywhere in the documentation.

Possibly a silly question, but I remember reading and now can't find the reference. Is it possible to add an additional channel, IP only over what already exists - i.e a 4 channel NVR can actually take 5 IP camera channels?

Thank you @Dan I couldn't find that link anywhere! Yes, an old system indeed, I'm intending to adopt it from another installer, then ultimately upgrade it!

Hi all, I'm adopting a legacy DS7708NI-ST (haven't even worked out what ST stands for, other than seriously temperamental!) Current version is V3.3.1, and ideally, I'd like to try and bring it up to the last release. Is there a source for firmware for these legacy devices, to try and bring...

Hi @Dan The camera is running V5.5.131 build 200220

I have a number of IP Bullets (2CD2346G2) connected direct to hikconnect without NVR. They all work reliably to provide a live view except for one... Watching playback, it will jump back to a static clip of when it first powered on. I have reset the camera, reconnected etc... but still have...

Agreed JB! I trained in electronics, and Normally Open was just that! I'll take a look at this system and see what it indicates. Thanks!

Thanks JB, I'll give that a try. It's the first time I've worked on an alarm input, so picking through the problems! Just to clarify your comment that the alarm is permanently in - if the camera is programmed to look for a NO alarm, that means it'll trigger on the closing pulse, or have I got...