Search results

Morning Everyone, Does anyone know/tried using HiLook cameras on a Hikvsion NVR that allows the smart event line crossing via ONVIF. Generally speaking when you import cameras via ONVIF it does not allow for smart events. But considering HiLook is a partner and made by the same company...

Ok thanks a lot JB1970!

Good Day, All I am looking connecting smoke detectors to an I/O device. I generally have done this using a company called Geovision however they hard to get stock in SA. Can someone recommend am I/O Hikvision device that would work with IVMS-42000...

Good Day all, Can anyone tell me if I can connect smoke detectors to this intercom and configure the smoke detectors on the I/O of the intercom as an alarm on IVM2-4200 It's an interesting question but wanted to ask before I purchase. Thanks.

Ok thanks a lot. Will go with the varifocal 4MP. The poles ares connected using ubiquiti nanostations which in turn will connect to the 32 Channel Hikvision NVR.

Thanks a lot Dan and dturtill. This makes sense I am happy you were able to break this down for me. Dan can you recommend a Hikvision camera. The camera would be on a wooden pole 4 meters high that would cover a perimeter on a large farm. The poles would be around 200 meters apart. I am...

GOOD DAY, I am planning on purchasing DS-2DE4225IW-DE (S5). I will be connecting this to this controller: Ubiquiti SunMAX SolarPoint 24V 40W Outdoor 4 PoE Controller | SM-SP-40 The controller has 24 Poe output ports The PTZ requires 12 VDC, PoE(802.3at) I marked 802.3at as the key word I...

As a note an update for viewing NVRs/cameras remotely. If you forward port 80 it seems to allow one to view them on internet explorer Port 8000 also needs to be forwarded, this is primarily to see everything on IVM2-4200

Thanks a lot Dan. Yes, agreed. IP is the way to go. Analog worked for when it was made but would never buy it now.

Good question. Is there a way I can find out from the NVR (via internet explorer)? They are analog cameras no IP. Otherwise I can ask the owner for this data. Model: DS-7216HUHI-K2

Ok great, will try that on some of the NVR's. Thanks' again for the great work!

Good Day All, I am trying to add line crossing onto someone's Hikvision cameras and it gives me the following error: Not enough resource for human body analysis engine Any idea what this means? I was only able to add line crossing to, two of the cameras locally.

Yes port forwarding is set and I can view everything on IVMS-4200. However I can't always view them on internet explorer and I am not sure why. I want to be able to make changes to the virtual alarms on the cameras remotely instead of having to keep going back to the different sites. This...

Thanks a million Dan, I was able to fix this by typing it under the local page. I kept going to the platform page.

Good Day All, Can someone tell me what needs to be configured on the Hikvision NVR that is connected to the internet to allow one to view the NVR remotely on internet explorer. I know I have to put the Static public IP in internet explorer not the NVR IP and sometimes put the port #. What...

Good Day All, I am trying to set virtual alarms on someone's NVR however I can't see the cameras. It tells me the following when I try and view the cameras: "The stream is encrypted. Please go to the Local Configuration interface to set the Encryption Key and restart live view" I have set...

Hi Guys, I am just setting up a camera system with the Ubiquiti | sunMAX. I am trying to connect Hikvision IP cameras directly to the Poe ports which I don't think is the correct voltage for a camera to be plugged in directly. Do I buy a poe 12v splitter for this ?

Generally I put one line on the "main area" and then I put a intrusion alarm box which also better than motion. If any one enters the "box" you get an alarm.

Yes I know and I have purchased several of them. But the built in LED only goes so far.

I try to avoid motion detection these days, due the false alarms. Cameras that have line crossing and intrusion is the way to go. That's why I changed from Geovision and Uniview to Hikvision was because of the cameras with this function and the Hikvision software that works with it. If you have...