Search results

Never thought of using the switch to program, luckily it is a managed switch - Thanks I will get back on the other issue, well see if there is a difference locally.

Thanks JB, Yes, it's very painful moving them from one to the other because of this. The subnet addresses don't always default within the cameras themselves and will not work at all on either. I have one at the moment I'm messing with which will not move over to the unit sub address, yet...

Hello Phil, The stability problem is when using the unit POE, the cams slow to a stop - then they speed up the catch up going by the clock but the more cams I connect the worse it gets, they then disconnect and come back. I can literally move the cams to the POE network switch connected to...

My new M series, has issues with the POE ports, try a separate switch!

Any feedback from Hikvision regarding the POE port problem I'm having? I have been using just two IPCs for the last month on it which still cause nothing but problems?

Hello Phil, WESTERN DIGITAL WD WD60PURX-64LZMY0 PURPLE 6TB 64MB CACHE. I can look for more info if need. Regards

Morning folks, I was awakened by the 3-long 2 short beeps this morning. HD1 had failed some time in the night, HD2 was not picked up straight away so a gap of a few hours was left unrecorded. Seems HD1 was full, but HD2 empty - perhaps the system attempted to overwrite HD1 first? Bad sector...

I am finding playback a little jumpy when hitting events, but not really in the know about best IPC settings on the G5s. Still need to resolve problems with onboard POE. This weekend I'll try more settings.

Thanks, I think hardware off has done the trick.

I like the look, but crashes when I live veiw single screens. Maybe this old tab.

These were all that were on there plus a door cam: DS-2CD2387G2-LU DS-2CD2625FWD-IZS DS-2CD2T47G1-L I have now moved two of them to a daisy-chained switch and seem good now. I have only 2 cams left on the DVR - DS-2CD2387G2-LU And door cam - CORRECTION - Door cam was not on...

Hello Phil, Yes all were ok on the I-series. I will make a list, and perhaps move them all to a separate POE switch to experiment. the most stable seems to be the low res door cam.

I think I may be onto a problem with my new DVR M-series having moved from the I-series, perhaps someone can help? All IPCs on the inbuilt POE are unstable, whereas if I move them to a POE switch seem to work fine. I wonder if the power is set too low - I will keep swapping and trying new things.

Windows 11 - IE mode worked for me!

I restarted pc and dvr. Maybe it didn't clear. I have to do some more testing by moving the G2 Ipcs from my fibre link to the on board poes where the problems are. No problem on fibre link remote switch.

Thank you Phil, Is there a difference between NEU and STD? Update: flashed 4.61.400 - White screen of death in Firefox and Edge but works in Chrome. Live view in iVMS is terrible on older IPCs(G1 etc). I shall persevere. May go back on firmware.

Any new firmware for the M-series. Just having a few issues with getting off the ground - random cam disconnections and freeze. Thanks Update: After some IP juggling, it's looking better. It's more fun when it gets better.

Hello Dan, It's working, thank you for your time! Best regards John

That's interesting Dan, When I do a search on the UK/EU site , it was the 5.7.10. Thank you I will give that a go! Regards

Hello, Is there a legacy firmware site for Hikvision cams? My DS-2CD2T87G2-L will not make the jump to the latest firmware from V5.5.154 build 200928 to 5.7.10 Thank you John A.