Search results

I thought as much, Thank you Dan!

Thank you.

It does indeed, need to verify from old, then new!

Hello All, Can my contact number be changed if I no longer have the old number to verify, or is it a matter of creating a new account? Many thanks John

Thank you for posting, very helpful in choosing next IPC

Thank you for this info Kyle, running through some tests this week end. Best regards

I think it's a HD problem, I have 4 WD purple 6TB. They were already used drives and I'm seeing errors on two - Any suggestions on the latest and greatest?

Good morning all, I've been trying to work out why my Drives just fill and not R/W or Overwrite once all are filled. I think the settings on the Series M are correct? I had to reformat in the middle of the night to stop the bleeping so the photo shows free space. Am I missing something or maybe...

When I started this thread there was no firmware upgrade available, The M unit was new out so it was easy to assume there might be a problem with the hardware or with the IPCs compatibility, there was nothing I could do to fix it. Whenever experiencing such problem having tried all possible...

My issues seem to be resolved since receiving the M unit back from the lads here. I've been running the set up for a few weeks now, I occasionally think I see the counter on the live screen lag but I wonder if I'm just imagining it after all the troubles I had before. Firmware has to be kept...

Thank you Kyle, I will report back once I'm all set up. If I do get an offending IPC, it will be removed.

Thank you Phil!

My issue is more severe, I could just watch the pauses/slows. More IPCs and they disconnect. If you have a separate POE switch I would use it to see if the problem is gone - would be some faffing getting the IPCs back on the Internet provider hub subnet.

Hello John, I'm still putting my penny on the psu, they can make things unstable with fluctuating voltages and feed without complete failure. Just one thing I didn't mention before I sent back to be checked was I could hear it faintly squealing like a water heater - capacitor? I hope this is...

Thank you Kyle, I hope you find something. As I mentioned in the emails - I will check hard drives before sending, I don't want to be caught out there either.

Hi Phil, I've just put the four IPCs back on my old I series(had it all reset and boxed, glad I kept it). No problems at all. It might be time for me to give up and send it back for you to look at! Regards

I tried just the HDs on a separate PC PSU - no difference, but is it on the same rail as the mainboard POEs? I'm going though the IPcs again one by one however I think it might be time to have the unit checked out unless anyone wants to send me a M-series PSU I can try?

I did notice that all four HDs are now on the same power lead, which I thought was cheap. Wonder if I move them onto a separate PSU, I have a spare 500w. Adding to the evidence, I have a drive fail too. I removed it and am running on three - could be that 4 corrupted the data.

I appreciate any ideas, even straws. I don't want to send back a good unit and look a fool. I have been changing frame rate, bitrate, and in desperation picture size. I seem to get away with more in substreams though the timer still slows and plays catch up after. I will tomorrow disconnect...

Update - The symptoms are evident in live view even local - HDMI and playback. The more IPCs I connect, the worse it gets. Power consumption appears normal - I did try long line setting too. Depressing!