I have 8 Imou cameras:
5 Crusier SE (4mp) versions https://www.imou.com/en/product/detail/cruiser-se-plus
2 Cruiser 2 SE 3mp Versions https://www.imou.com/en/product/detail/cruiser2
and one generic IMOU bullet camera.
All cameras are linked to a IMOU 8 channel NVR using POE splitter adapters...
Hi everyone. I have 2 dahua cams: 1)IPC-HFW5842H-ZHE 2)IPC-HFW7842H-Z.
Both have firmware dated 2019 and I have some problems managing the IVS and video parameters with my nvr5232. I tried to download the firmware for these 2 cams from the Dahua website but upon installation it gives me the...
Hi, I got a question that couldn't find any answer: If my NVR has 1ch 4K decoding capability but like 16ch 1080p decoding capability, does it means that recording is being affected too? Like, if there are more cameras are going to be recorded in lower resolution? Thank you for the help.
I have multiple Dahua DVRs and each one has multiple user accounts. Each time I want to edit a user account (remove access from a camera, change password, or simply remove the user) I can't, and I get the error that says: "user is in use now" as shown in the image attached below. To solve this...
Hi guys,
I bought the DH-XVR5116HS-I3 and a 4 x 5MP TOIC active deterettence camera and I am still using 2 of my old 1080p camare's.
The issue I am experiencing is that the SMD feature is not working, I had a look and I see when I only plug in 4 camera;s or 2 I get like an exclamation mark by...
Hello,
just recently bought a Dahua IPC-HFW3441T-ZS and encountered two issues:
1) cannot access rtsp-stream with any of the following links:
rtsp://192.168.0.16:554/Streaming/channels/1
rtsp://admin:password@192.168.0.16:554/cam/realmonitor?channel=1&subtype=0...
Hi,
My camera serial is : dh-ipc-hfw1200sp-0360b
I need to reset its password (I forget it) . I tried using config tool but It not worth and there is no reset button at the camera anywhere .
Is there any another way to reset its password .
Hi all, I'm struggling to choose between HikVision and Dahua setups for a domestic installation. I have a couple of installers I've spoken to who each have their pros and cons, but one offers HikVision and the other Dahua. The guy who does Dahua is brilliant at installs - he's an expert at...
I've got some old Dahua IPC-HDW4631C-A 's, and 3 of them stopped working within about a week or so's time. They are originally gray market cameras, and are a good 5 or so years old at this point. Up until failure (some months back at this point), they've worked as well as expected. The odd...
Hello, I'm trying to get through the SDK from the DH-XVR5108HE-l2 DVR the count of people who have passed, I use an example from the SDK - PassengerFlow, but it does not work, it always returns 0. what could be the reason and how can you solve it? DVR firmware latest
Hello everyone, I am new here, if some have experience with SmartPSS is there any way to use same database for ACS and Video intercom card readers'?
Thanks.
Hi,
I am wanting to connect my laptop to my 4g dahua nvr 4104 to configure it by laptop,
It has A 3 network SIM card in it and I can see it working on the remote viewing software
When I plug the cat6 into my laptop from the nvr is says unidentified network, I have tried all online info such...
I am looking to get the IPC-HFW5241E-Z12E to work with my hikvision 7608ni-k2/8p NVR.
The NVR will be 60 ft away from the installed camera.
I already planned to use a POE switch and run the cat 6 cable to the camera. I want to setup the AUDIO IN and OUT, plus the ALARM IN and OUT.
1) Am i...
Hello everyone, I want to buy ip camera and I cannot decide which one to buy i have theses 2
1. Hikvision DS-2CD2043G0-I 4MP
2. Dahua DH IPC-HFW4431R-Z
They both are 4mp
I currently use Dahua XVR and have both dahua and hikvision cams.... so which I sould get...? Thanks