doorbell

I have a DS-KD8003 doorbell installed outside my door and have an electric strike connected to it. I was wondering if this solution is safe. Basically, anyone can come in and take the cover off and pull the DS-KD8003 out of the box. Then they simply switch the NC1 or NO1 contact and the electric...

We've had a DS-KD8003-IME1 gate intercom and it always puzzled why hik wouldn't add temporary pin option to allow for deliveries and the like. I just noticed in the HikConnect app that our DS-KV6113-WPE1 doorbell does have a temporary pin option now. What gives? Why one device and not the...

New firmware on the global site for DS-KV6113-WPE1(C) - 2.2.78_241012. No release notes as yet.

Hi – I recently added a Hikvision doorbell and indoor station (DS-KV6113-WPE1(C) and DS-KH6320-WTE1). This adds to a system including a DS-7616NI-I2/16P NVR and 10 various Hikvision cameras. The doorbell is set up and rings through to the indoor station. All the other cameras are also added to...

A little bug to report with the DS-KV6113-WPE1(c). Or maybe not a bug but improvement needed by Hikvision... The most recent firmware (2.2.65_230703) added the ability to switch the relay output functionality on the unit from 'Electric Lock' to 'Mechanical Doorbell' as shown below: The idea...

This may be of interest to some who use the KV6113 and other Villa Door Stations that don't use the lock release.... Previously if you wanted to use the villa door stations in a home/residential setup without a lock release (IE you just want to use it as a doorbell); there was no means to add...

Hi, I want to get a smart door bell and already have a HikVision camera setup, ColorVu + DS-7608NI-K18P NVR So I though getting a HikVision doorbell would be the way to go as I am familiar with some of there products and already use Hik-Connect mobile app. I live in an old house so there is...

I have an outdoor DS-KD8003-IME1 unit with an indoor DS-KH6320-WTE1 installed. Basic functions had been working as expected, but I got my ISP's modem replaced, and all IP devices in my house got new IP addresses from the new DHCP server. Since then, I have many issues: 1. I had set up all...

Has anyone else encountered an issue whereby the DS-KV6113-WPE1 has very bad incoming audio quality? I cannot understand anyone at the door but they can hear me very well. I have this device hooked up to POE - into a switch then about a 20m ethernet cable to a Ubiquiti router.

Hi all, I am looking to add a doorbell/intercom (Hikvision DS-KD8003-IME1 and suitable indoor station) to my existing system (NVR and cameras) and would be grateful of some advice or reassurance on the compatibility with Hikconnect. I have hikconnect on my Iphone and connect to my existing NVR...

I installed DS-KV6113-WPE1 today and updated the firmware to the latest version. When trying to enable platform access, the Enable button is disabled and I cannot enable it whatsoever. Is there something I am failing to do? Firmware Version: V2.1.5 build 200904 The doorbell is hardwired...

I was wondering if anyone can tell me if it is possible to plug the DS-KV6113-WPE1 into one of the POE ports in the back of my DS-7608NI-K2 / 8P (8CH Hik NVR)? I have tried plugging the doorbell into the NVR, the doorbell powers up and makes noises when pressed but the NVR is stuck on...

Hello I want the basic working functionality of a video doorbell like Ring in Live mode to our phones but hardwired ( I can do this with Ring units with a transformer I know ). I also want continuous surveillance around the door stored locally on my Synology DS. I already use this for one...

I want to buy a doorbell with intercom system to open my door. My door will be replaced shortly and will have a digital lock. They advice my to buy an intercom/doorbell combi like the HikVision DS-KIS701. That looks like a very nice system, but the problem I have with this is that, if I...