AX PRO AX Pro Siren and NVR?

[Chin1985]

I have AX Pro and want to use that siren as alarm on NVR motion detection. Is it possible ?

 

[Kyle]

I think you may need to use an Acusense camera and intrusion detection, but it should be possible if you do.

I believe the camera will also need to have its own LAN IP address, so it should be connected to a POE switch, or to the network via Wi-Fi, rather than to the NVR's PoE ports.

Please see the video in post #2 of this thread for the setup instructions:

AX PRO - Link AX Pro to a Hikvision NVR?

Hi, is it possible to start recording on a hikvision camera connected to a hikvision NVR when an AX Pro sensor is triggered ? I read that is possible to use an IP for a camera that is not connected to an NVR. My NVR has dedicated links in Camera management to directly access a camera interface...

www.use-ip.co.uk

 

[Chin1985]

I just want to use Hikvision Sounder as Buzzer for NVR alerting . Can we add AX Pro Buzzer as IOT alarm device ?

 

[Kyle]

I don't think so, Hikvison doesn't offer much IOT support.
When I last spoke to them, they confirmed that the only integration between CCTV and AX-Pro available is what's shown in that video.
If you watch from 1:40, you will see how the cameras can trigger the AX-Pro sounder.

 

[Chin1985]

Thanks a lot. One last question, What is the easist way to provide alarm or Phone call during a event ?