Neckron666
New Member
- Messages
- 1
- Points
- 1
Hi guys,
I just purchased a DS-7608NI-K2 (updated to V3.4.109 Build 200320), I purchased a house but the previous owner took the NVR with him leaving the cameras, There are 6 cameras, a door station and a doorbell (doorstation and doorbell are some Aussie brand - Ness that have some sort of relationship with hikvision but also dont go because the egateway that controls them was taken as well).
I plugged all of the cables into the NVR upon setting it up and it appears the first two cables were the doorbell and doorstation - they come us as offline IP cameras). I've since unplugged them from the NVR as they dont exist and are not powered up but when I go to remove them from the web interface the Delete option is grayed out.
I also cant delete them from the HDMI interface as the mouse just doesnt seem to work, it lights up but there is no cursor and i just get the 6 cameras around the edge of the screen and a big NoLink from what I assume is one of the offline "cameras"
As I missing something? Does it have to be plugged into VGA to control the NVR via mouse/external monitor? Why cant I remove a camera from the internal NIC of the NVR?
Any help is appreciated!
I just purchased a DS-7608NI-K2 (updated to V3.4.109 Build 200320), I purchased a house but the previous owner took the NVR with him leaving the cameras, There are 6 cameras, a door station and a doorbell (doorstation and doorbell are some Aussie brand - Ness that have some sort of relationship with hikvision but also dont go because the egateway that controls them was taken as well).
I plugged all of the cables into the NVR upon setting it up and it appears the first two cables were the doorbell and doorstation - they come us as offline IP cameras). I've since unplugged them from the NVR as they dont exist and are not powered up but when I go to remove them from the web interface the Delete option is grayed out.
I also cant delete them from the HDMI interface as the mouse just doesnt seem to work, it lights up but there is no cursor and i just get the 6 cameras around the edge of the screen and a big NoLink from what I assume is one of the offline "cameras"
As I missing something? Does it have to be plugged into VGA to control the NVR via mouse/external monitor? Why cant I remove a camera from the internal NIC of the NVR?
Any help is appreciated!