DavidWills
Member
- Messages
- 8
- Points
- 3
Hi everyone,
I hope you can help me as a newbie but with a good technical understanding of things.
Have DIY installed four ColourVu (analog) cams connected to a DVR which is on my LAN via a Powerline adaptor. The cams are working and I can view them in Live on my PC (HiLook Vision) and also my iPad but I am having issues trying to configure them. For example in the 'events' I do not see any image to set the motion detection grid (grey screen preview) or indeed any event feature, using iVMS-4200 which I downloaded as an alternate the cameras are not detected, in both software apps the DVR is detected. I've not yet tried taking a screen up the loft and using the HDMI directly to the DVR, if I can help it...
What I wanted to do first was set the LED to only come on during an event in low light and according to what I can find on the web this is done with the External Devices section in settings. That is there for a moment when I click remote configuration but then within a few seconds the menu tree collapses and the option disappears. In another thread on this forum a user suggested the option had been moved to Image, again not an option I seem to be able to find to disable that LED when not needed.
Been reading for hours and watching YouTube but withing any success. Guidance appreciated.
I hope you can help me as a newbie but with a good technical understanding of things.
Have DIY installed four ColourVu (analog) cams connected to a DVR which is on my LAN via a Powerline adaptor. The cams are working and I can view them in Live on my PC (HiLook Vision) and also my iPad but I am having issues trying to configure them. For example in the 'events' I do not see any image to set the motion detection grid (grey screen preview) or indeed any event feature, using iVMS-4200 which I downloaded as an alternate the cameras are not detected, in both software apps the DVR is detected. I've not yet tried taking a screen up the loft and using the HDMI directly to the DVR, if I can help it...
What I wanted to do first was set the LED to only come on during an event in low light and according to what I can find on the web this is done with the External Devices section in settings. That is there for a moment when I click remote configuration but then within a few seconds the menu tree collapses and the option disappears. In another thread on this forum a user suggested the option had been moved to Image, again not an option I seem to be able to find to disable that LED when not needed.
Been reading for hours and watching YouTube but withing any success. Guidance appreciated.