Nvr DS-7608NI-K2 / 8P firmware V4.40.016 build 200803
Cameras DS-2CD2385FWD-I firmware V5.6.5 build 200316
2x GJD GJD260 30m Dual Tech IP Motion Detectors
I incorporated GJD PIRs into my network/CCTV system via PoE switches to prevent false positives but have been unable to achieve full functionality. I would ideally like notifications on HIK Connect when an alarm event is triggered by the PIR. The NVR recognises the PIRs through IOT menu (Alarm device) as IOT 1 and IOT2 and emails are triggered when they activate(selected on IOT event configuration; continuous record); The alarm event appears in the log; recording is also triggered and achieved but despite my best efforts, no notification is sent to HIK Connect despite linkage option Notify surveillance centre ticked. Hikvision Support suggest this is not supported but are not sure why which seems odd. Does anyone have this set up, experienced the same or can suggest a work around enabling notification of a PIR event using Alarm In alternative wiring? thanks
Cameras DS-2CD2385FWD-I firmware V5.6.5 build 200316
2x GJD GJD260 30m Dual Tech IP Motion Detectors
I incorporated GJD PIRs into my network/CCTV system via PoE switches to prevent false positives but have been unable to achieve full functionality. I would ideally like notifications on HIK Connect when an alarm event is triggered by the PIR. The NVR recognises the PIRs through IOT menu (Alarm device) as IOT 1 and IOT2 and emails are triggered when they activate(selected on IOT event configuration; continuous record); The alarm event appears in the log; recording is also triggered and achieved but despite my best efforts, no notification is sent to HIK Connect despite linkage option Notify surveillance centre ticked. Hikvision Support suggest this is not supported but are not sure why which seems odd. Does anyone have this set up, experienced the same or can suggest a work around enabling notification of a PIR event using Alarm In alternative wiring? thanks