Toto
New Member
- Messages
- 2
- Points
- 1
At Present I have a system which is (DS-7608NI-K2/8P) the said system is running firmware of V4.30.60 Build 201228
The same system also got 4 IP Camera attached these are;
2x ==> DS-2CD2385G1-I running firmware of ( V5.6.5 build 200316 )
1x ==> DS-2CD2343G0-IU running firmware of ( V5.6.5 build 200316 )
1x ==> DS-2CD2346G2-IU running firmware of ( V5.5.150 build 200927 )
My Query is
1) If I wanted to reset my system back to fresh out of the box
which type of reset is appropriate from below?
a) Simple Restore
b) Factory Defaults
c) Restore to Inactive
could you also advise what I have to have before I start the reset process.
2) When they say the following in the system what do they mean;
a) Simple Restore
b) Factory Defaults
c) Restore to Inactive
3) Currently I have setup the system with many different passwords; if password forgotten and the system required to be reset I have the following saved;
a) Using email notification
b) By answering three questions, these where setup during my current password reset process
c) I have GUID file
d) I also have Mobile authentication
Do I need any other setup in case of disaster recover for password lost event?
4) At present I have 4 passwords for the above system; these are
NVR access User Password including Pattern
Camera Access Password
QR User name for the Encryption app
iOS App Login Password
All of the passwords above are different form one another, when I save the GUID file would this take the full password list including QR name?
5) In the current system if I login on the camera ( DS-2CD2346G2-IU ) and setup event I see People and Cars; but if I login the NVR and see under event of the same Camera I see People and Sedan and I know this is a US expression no one in EU or UK uses that; how could I change the region if that is the root cause of the issue? Or do you know what I need to do for the NVR to display Car?
The same system also got 4 IP Camera attached these are;
2x ==> DS-2CD2385G1-I running firmware of ( V5.6.5 build 200316 )
1x ==> DS-2CD2343G0-IU running firmware of ( V5.6.5 build 200316 )
1x ==> DS-2CD2346G2-IU running firmware of ( V5.5.150 build 200927 )
My Query is
1) If I wanted to reset my system back to fresh out of the box
which type of reset is appropriate from below?
a) Simple Restore
b) Factory Defaults
c) Restore to Inactive
could you also advise what I have to have before I start the reset process.
2) When they say the following in the system what do they mean;
a) Simple Restore
b) Factory Defaults
c) Restore to Inactive
3) Currently I have setup the system with many different passwords; if password forgotten and the system required to be reset I have the following saved;
a) Using email notification
b) By answering three questions, these where setup during my current password reset process
c) I have GUID file
d) I also have Mobile authentication
Do I need any other setup in case of disaster recover for password lost event?
4) At present I have 4 passwords for the above system; these are
NVR access User Password including Pattern
Camera Access Password
QR User name for the Encryption app
iOS App Login Password
All of the passwords above are different form one another, when I save the GUID file would this take the full password list including QR name?
5) In the current system if I login on the camera ( DS-2CD2346G2-IU ) and setup event I see People and Cars; but if I login the NVR and see under event of the same Camera I see People and Sedan and I know this is a US expression no one in EU or UK uses that; how could I change the region if that is the root cause of the issue? Or do you know what I need to do for the NVR to display Car?
Last edited by a moderator: