Can anyone help
We had a burglary over the weekend and the thieves stole our NVR 7600 DS-7608NI, I had 6 cameras connected with this NVR (DS-2CD385FDW-1).
The Nvr box was ripped out we were left with uncertainty on our password for the cams however we managed to locate the password.
We got the new NVR 7600 DS-7608NI 12/8P, and set up as new password however we are having issues connecting all cameras.
When we connected all 6 camera’s back with the original password it only picked up 3 cameras out of the 6 despite trying in different ports nothing worked, the 3 which was showing had bad images displaying don’t know why.
The other three eventually had to be taken down and we had to do a full reset on the cam, however we are struggling to pick up all cameras on the NVR or on the SADP tool.
Now it’s only picking up 2 or the three which were working and I am not sure where we going wrong
Can anyone advise or are we missing any setup steps.
We had a burglary over the weekend and the thieves stole our NVR 7600 DS-7608NI, I had 6 cameras connected with this NVR (DS-2CD385FDW-1).
The Nvr box was ripped out we were left with uncertainty on our password for the cams however we managed to locate the password.
We got the new NVR 7600 DS-7608NI 12/8P, and set up as new password however we are having issues connecting all cameras.
When we connected all 6 camera’s back with the original password it only picked up 3 cameras out of the 6 despite trying in different ports nothing worked, the 3 which was showing had bad images displaying don’t know why.
The other three eventually had to be taken down and we had to do a full reset on the cam, however we are struggling to pick up all cameras on the NVR or on the SADP tool.
Now it’s only picking up 2 or the three which were working and I am not sure where we going wrong
Can anyone advise or are we missing any setup steps.