Firmware Latest Milesight Firmware for NVRs (V7x.9.0.7-r3) and Cameras (V4x.7.0.73-r7)

[Kyle]

Milesight have recently released new firmware for all of their NVRs and cameras. The latest firmware updates can be downloaded here from their Download Centre.

The Release Notes are below:

Firmware for cameras:

• Support to adjust the sensitivity of Day/Night switch on 180¡ã Panoramic Mini Bullet and New Mini Bullet;
• Support to display "Sum" and "Capacity" of People Counting;
• Support to save LPR snapshot into SD card;
• Optimze the memory reclaims;
• Fix the problem that the PTZ Bullet Camera fails to tilt down when using 3D positioning function;
• Fix the problem that you may fail to login after upgrading to version 4X.7.0.73 with IP parameters changed;
• Fix the problem that Auto Tracking still works without setting the Schedule;
• Fix other bugs.

Firmware for NVRs:

• New feature: Private HDD in Storage->Disk->Edit.
• Fix APP message push issue;
• Fix Video Loss failed sending email issue;
• Fix the VCA track missing issue on live view of local display;
• Optimise the prompt for 3rd party Motion Detection;
• Effective time and action settings changed to be configurable even when motion detection is disabled;
• Milesight Fisheye camera 4R mode Motion detection limit;
• Security upgrade for TLSV1.2

 

[jamesb]

I've not been able to update the firm on my NVR

model UI-1009-PA
current version: 72.8.45.6-2

I've tried updating to 72.9.0.7-r3 (from the milesight download center) but consistently get the message 'Upgrade unsucessfully!' after a couple of seconds. I've tried a factory reset, formatting harddisks etc, but the message is always the same.

Any tips on how to update the firmware on these devices?

 

[Dan]

Hi @jamesb

You are several versions behind on NVR firmware, Milesight introduced a key firmware over a year ago that has to be updated to first before you can go beyond it, see the below forum post for more information:

Firmware - NEW Milesight NVR Firmware (7x.9.0.2) Introduces Support for VCA Functions

Update 26th February 2020 - Superseded by V7x.9.0.7-r3 and V4x.7.0.73-r7: Latest Milesight Firmware for NVRs (V7x.9.0.7-r3) and Cameras (V4x.7.0.73-r7) Milesight have just this week released a new NVR firmware, 7x.9.0.2 introduces support for VCA functions which means that you can now control...

www.use-ip.co.uk

 

[jamesb]

Hi,
thank you! your advice did the trick, I've managed to upgrade now