I have a small Hikvision setup that has been working for many months without a problem. We have recently moved house and therefore I've been slowly installing the system again at the new house. I have a mixture of cameras that' I've bought over the years and so far, the ones I have installed are all working as expected, with exception of my most recent DS-2CD2385G1-I. As far as recording goes, it works, both on the camera itself (using the MicroSD and via the NVR. Live View works directly on the camera but via the NVR (DS-7608NI-K2 / 8P) webpage I just get an error message saying Live View Failed. All other cameras display the feed correctly. I have also tried using the Substream.
I am running Firmware version V3.4.107 build 190927 on the NVR and V5.6.2 build 190701 on the camera. The camera is connected to my PoE switch and so is the NVR. I am not using the local PoE ports on the NVR. The other cameras are connected in the same way.
Any ideas please?
I am running Firmware version V3.4.107 build 190927 on the NVR and V5.6.2 build 190701 on the camera. The camera is connected to my PoE switch and so is the NVR. I am not using the local PoE ports on the NVR. The other cameras are connected in the same way.
Any ideas please?