Afternoon, hopefully someone can help with a problem i am having with a mobotix M24 camera.
THe camera was working until last week when the user reported its not showing in MxCC. I arrived on site to look at the camera and it is not responding wo any pings on its ip address and MxCC cannot communicate with it.
I got out on the ground and had a look at the camera in place, checking all connections and terminations (ethernet) all were in perfect condition.
I noticed the leds on the front of the camera are both on solid all the time.
I have tried doing the factory reset holding the left button but both button lights just stay on solid, after about 10 minutes the red led flashes for a few seconds and they both go back to solid again
THe camera was working until last week when the user reported its not showing in MxCC. I arrived on site to look at the camera and it is not responding wo any pings on its ip address and MxCC cannot communicate with it.
I got out on the ground and had a look at the camera in place, checking all connections and terminations (ethernet) all were in perfect condition.
I noticed the leds on the front of the camera are both on solid all the time.
I have tried doing the factory reset holding the left button but both button lights just stay on solid, after about 10 minutes the red led flashes for a few seconds and they both go back to solid again