Calvinder
Member
- Messages
- 19
- Points
- 3
I can't figure out how to see were motion was detected in playback on iVMS 4200, iVMS4500 or on hik connect . The only place I can see it it on the monitor connected directly to the nvr.
I am talking about the green motion identifiers under the blue time line at the bottom. If I search for it I have seen images of the motion identifiers being in the blue timeline on the apps.
But I can't seem to get them to show up.
NVR DS7608NIE28P Cameras DS-2CD2041G1-IDW1 Both with up to date firmware.
Edit Note I just put a memory card in one of the cameras and If I play back that camera directly (not threw the NVR)I see the motion identifiers in the time line.
Seems to be an NVR problem.
Thanks
Calvin
DS-2CD2041G1-IDW|Wi-Fi Series|Hikvision
I am talking about the green motion identifiers under the blue time line at the bottom. If I search for it I have seen images of the motion identifiers being in the blue timeline on the apps.
But I can't seem to get them to show up.
NVR DS7608NIE28P Cameras DS-2CD2041G1-IDW1 Both with up to date firmware.
Edit Note I just put a memory card in one of the cameras and If I play back that camera directly (not threw the NVR)I see the motion identifiers in the time line.
Seems to be an NVR problem.
Thanks
Calvin
DS-2CD2041G1-IDW|Wi-Fi Series|Hikvision
Last edited: