Hi all, please help my brain from exploding
I have just installed 2 Hik Ptz cams and 2 static hik cams at a location with no data connection, I have built a small cab with poe switch, patch panel and a Ubiquiti psu for a gigabeam dish, everything here is tested and working fine
The main premises has internet, the gigabeam is sending data back to the main premises and into a passive switch, from the switch I am connecting to one of the channels on the NVR
My issue is that the NVR only finds a single camera from the remote location ? Infact if I unplug and re attach the fly lead from the switch to an NVR chanel I get a random different cam show up from the remote location, the NCR is a Hikvision DS 7608NI I2/8P
What am I missing ?? I wrongly assumed connecting the switch to an NVR chanel would be all that I needed to do and the NVR would simply assign a chanel to each camera from the remote location
Please help my brain, its a bit confused
I have just installed 2 Hik Ptz cams and 2 static hik cams at a location with no data connection, I have built a small cab with poe switch, patch panel and a Ubiquiti psu for a gigabeam dish, everything here is tested and working fine
The main premises has internet, the gigabeam is sending data back to the main premises and into a passive switch, from the switch I am connecting to one of the channels on the NVR
My issue is that the NVR only finds a single camera from the remote location ? Infact if I unplug and re attach the fly lead from the switch to an NVR chanel I get a random different cam show up from the remote location, the NCR is a Hikvision DS 7608NI I2/8P
What am I missing ?? I wrongly assumed connecting the switch to an NVR chanel would be all that I needed to do and the NVR would simply assign a chanel to each camera from the remote location
Please help my brain, its a bit confused