Good morning
I have a Hikvision DS-2CD2346G2-ISU/SL AcuSense 4MP fixed lens Darkfighter turret camera with IR, built-in mic, speaker & alarm (2.8mm ) camera.
I have been getting used to the configuration whilst the camera is on the bench and need a little help.
I have fitted a SD card and initialised it and it is showing normal under the storage section.
I have connected a push button switch between ground and Alarm input 1.
I have configured the linkage on alarm activation to flash the light and write to the SD/FTP.
On pressing the button the light flashes but no images seem to have been stored.
On viewing the logs all button presses are stored.
In closing what is the best way to access stored images on the SD card?
Many thanks in anticipation
Andrew
I have a Hikvision DS-2CD2346G2-ISU/SL AcuSense 4MP fixed lens Darkfighter turret camera with IR, built-in mic, speaker & alarm (2.8mm ) camera.
I have been getting used to the configuration whilst the camera is on the bench and need a little help.
I have fitted a SD card and initialised it and it is showing normal under the storage section.
I have connected a push button switch between ground and Alarm input 1.
I have configured the linkage on alarm activation to flash the light and write to the SD/FTP.
On pressing the button the light flashes but no images seem to have been stored.
On viewing the logs all button presses are stored.
In closing what is the best way to access stored images on the SD card?
Many thanks in anticipation
Andrew