Hi all, I would like to fit some kind of beam sensor, which I can use to trigger a camera to make either take a video or photo. I am able to affix a reflector on post opposite my gate, and can get direct line of sight to that from my garage.
I can easily pull another cable in from the NVR to the garage for power and signal to the transmitter. I can’t however get power on the other side of the road.
On the receiver end I want something which can be replaced easily if bashed by the verge cutter, and not something which is blatantly obvious. A simple reflector would be ideal if possible.
Additionally with just one sensor I can see leaves breaking the beam in the wind, is it possible to have 2 spaced roughly 600mm vertically apart?
Any ideas on a product with a decent IP rating and powered one end only?
NVR is 7608 i series and cams are 4K G2’s with a 7line ANPR.
I can easily pull another cable in from the NVR to the garage for power and signal to the transmitter. I can’t however get power on the other side of the road.
On the receiver end I want something which can be replaced easily if bashed by the verge cutter, and not something which is blatantly obvious. A simple reflector would be ideal if possible.
Additionally with just one sensor I can see leaves breaking the beam in the wind, is it possible to have 2 spaced roughly 600mm vertically apart?
Any ideas on a product with a decent IP rating and powered one end only?
NVR is 7608 i series and cams are 4K G2’s with a 7line ANPR.