Hi all,
Been racking my little tired brain about this. I am trying to add IP cameras to the new villa door station (DS-KV8113-WME1) via an NVR (DS-7608NI-I2 / 8P)
So my set up is
Number of IP cameras connected to the NVR (192.168.0.15), NVR connected to ubiquiti managed switch then via an unmanaged POE switch (Some ***hole forgot to buy a POE swtich) for the external door station and internal door station.
So I have got on the NVR virtual host enabled and can log on to each camera via 192.168.0.15:65001 - 65008.
When I try and add in to the door station an ip camera on any of the following ip's and ports I get an error returned when trying to live view it on the indoor station.
192.168.0.15 :554
192.168.0.15:65001 +
192.168.254.2:554
I have set the gateway on the cameras to 192.168.254.1 and the mask to 255.255.0.0 on everything. There is no flow control on the switch or snooping etc. I have the video feed of the door station recording on to a channel of the NVR already. Door station works perfectly with hik connect and indoor station (after there was an IP conflict of both wireless and wired connections, wireless is now disabled)
I might be missing something here but I am sleepy and tired and can't think anymore. Anyone got any ideas how to connect it.
Thanks in advance
Been racking my little tired brain about this. I am trying to add IP cameras to the new villa door station (DS-KV8113-WME1) via an NVR (DS-7608NI-I2 / 8P)
So my set up is
Number of IP cameras connected to the NVR (192.168.0.15), NVR connected to ubiquiti managed switch then via an unmanaged POE switch (Some ***hole forgot to buy a POE swtich) for the external door station and internal door station.
So I have got on the NVR virtual host enabled and can log on to each camera via 192.168.0.15:65001 - 65008.
When I try and add in to the door station an ip camera on any of the following ip's and ports I get an error returned when trying to live view it on the indoor station.
192.168.0.15 :554
192.168.0.15:65001 +
192.168.254.2:554
I have set the gateway on the cameras to 192.168.254.1 and the mask to 255.255.0.0 on everything. There is no flow control on the switch or snooping etc. I have the video feed of the door station recording on to a channel of the NVR already. Door station works perfectly with hik connect and indoor station (after there was an IP conflict of both wireless and wired connections, wireless is now disabled)
I might be missing something here but I am sleepy and tired and can't think anymore. Anyone got any ideas how to connect it.
Thanks in advance