Search results

As mentioned further up, I've never had a failure yet and installed hundreds.

I'm not sure myself as I do very little with the intercoms. The user on here that seemed to be most knowledgable about the intercoms was @KamirZG but they haven't been on the forum since December.

You should be able to unbind with the admin password. Teh only time of had an issue is with an older DVR with version 3 firmware.

I think no - at least the one I had installed at home didn't. You can configure via teh station screen but I used to just temporarily import it into iVMS-4200 and configure it there as I found it easier.

Yes. Person A needs to select the new camera in their 'Shared Devices' list. I added some cameras to a site last week and had the same thing (shared user reporting no access). I did it using the browser. Person A logs needs to login to their account at www.hik-connect.com Click on shared...

They are waterproof - plastic conduit when used with adapters is waterproof. As said in my first reply though, the camera is waterproof to IP65 and with the gland fitted on the RJ45 coupling you shouldn't have any issue. Some say to wrap that gland with self amalgamating tape but I never will...

The Hikvision box is not natively designed to take a 20mm conduit. That's a female adapter (I'd guessed it was a male). It really does not matter. If you want it to be 'correct' you'll need to source a 25 - 20mm reducer bush which you'll get from any electrical wholesaler/screwfix/toolstation...

No. Just replace the disk and initialise it. All settings remain intact. Be sure to only replace it with a surveillance grade drive - Seagate Surveillance/Skyhawk, Western Digital Purple or Toshiba S300.

In the image in your first post you can try ticking the box next to the HDD then clicking the 'Rebuild all data' button. Sometimes the recording database can becoming corrupted and it appears to not be recording with the history missing, so try that first. It takes some time. If that doesn't...

There is no issue there. Once the hard drive fills for the first time and starts overwriting, it will always show the remaining space as 0. When the HDD is overwritten it doesn't wipe the drive and start again with a full drive, it deletes the oldest recording 'chunk' to make room for the newest.

Yes both are fine and there’s little chance of water getting in.

TBH it's not critical as the camera is IP65 rated without the backbox. In the second image the 20mm plastic conduit has a male adaptor fitted (exposed thread). The exposed thread on that adaptor would normally be inserted through the side of an enclosure with a locking on the inside of the...

No. The maximum is 4 cameras or 40Mbps incoming bandwidth, whichever is reached first. If you want to add cameras you'll need to upgrade to a DS-7608NXI-K1/4P(D) which would allow up to 8 cameras (or 80Mbps incoming bandwidth). You'd also get the benefit of AcuSense (Human/Vehicle event...

My guess: Hikvision Plug and Play only works with unactivated cameras. You activated the camera and assigned a LAN address with SADP....you should have plugged it straight into the NVR which would have both activated the camera and assigned its address in the correct range. The NVR possibly...

Image quality will be the same as you currently have, but you'll get the added convenience of the AcuSense functionality. I tend to only install IP systems when at all possible but when I did fit HDTVi analogue (what you have), I wasn't a fan of that camera. The PoC version you have is fairly...

You’ll want to upgrade to one of the newer iDS models. IDS-7204HUHI-M1-PXT would be what I’d recommend. The P in PXT is for the PoC model.

I can't see anything fundamentally wrong with how you have it set up. I would clear the rule and save, disable intrusion and save then set it up again as it's not working. A couple of things when you set it up again: 1 - Start by setting up only the minimum size and leave the maximum alone...

You'll need to replace the disk, it's unlikely to be recoverable. Unfortunately it doesn't matter whether you use a locally connected monitor or a web browser; without the admin password you won't be able to initialise (format) the new disk. Any Hikvision installer would be able to attend and...

That's correct - you'll get a text event notification message in the phones notification area. That'll just be the Hik-Connect icon with the relevant message (Cam ? - Motion Detected, Line Crossing etc) Yes - text only notification. Tap it to jump from the notification into the Hik-Connect app...

As I’ve multiple sites on my app Home Screen it only shows 2 thumbnails from each. I don’t really mind. What does bother me that despite several updates, the app still scrambles the thumbnails and shows them in the wrong site with the wrong camera name. Dragging/refreshing the screen corrects...