firmware

I noticed yesterday that there's a new firmware build for the DS-KV6113 intercom (c revision). There's no change to the firmware version (2.2.65), but there's a new build date. This is now the third build date: 2.2.65_build230504 2.2.65_build230703 2.2.65_build231213 The 230703 build added...

I asked Hikvision support for a more updated firmware for an old DS-7208HFI-SVST. With the serial number and everything correct. They sent me the "correct" file and it turned out to be for the 7208HVI-SV. It stopped detecting the HDD, so, that version is obviously incorrect. They didn't take...

Hi, I am unable to find the latest firmware for the DVR below: iDS-7204HQHI-M1/E, current: 4.71.400 build 230723 I think K20A7S is the right firmware but when I tried the it, it was stuck on a loop when upgrading, it would load to 65% then go back to 0 until when I randomly rebooted and it...

Hi, Anyone knows whats up with the hikvision firmware portal? All the files have been removed and replaced with 3 tools, SADP, Batch Config and MVA. link is here https://www.hikvisioneurope.com/uk/portal/ before you could individually download the firmware for your device type. Hope this is...

Hi, I am unable to find the latest softwares for these two DVR: DS-7208HQHI-F1/N/1D3 (C), current: V3.4.81 build 170227 (WR) iDS-7204HUHI-M1/S/A (C), current: V4.26.010 build 200923 (WR) (for this one I have only found the EU firmware which doesn't apply to mine) Thank you to :)

Hi, after recent update of my HikVision DS-KD8003-IME1/S to version V2.2.62 build 230204 and DS-KH6320-WTE1 to version V2.2.20 build 23061 I am unable to see snapshots of people who pressed the outdoor doorbell button. I can see the images in the indoor station (SD card works fine) but not in...

This may be of interest to some who use the KV6113 and other Villa Door Stations that don't use the lock release.... Previously if you wanted to use the villa door stations in a home/residential setup without a lock release (IE you just want to use it as a doorbell); there was no means to add...

I've just spent 5 hours trying to figure out the difference between 3 identical cameras and why they won't all work with the same my NVR. My NVR is a DS-7732NI-14/16P running V3.4.95 Build 170626 - serial number indicates RR. The cameras are all DS-2CD2346G2-IU and all serial numbers indicate...

New firmware for the M series has appeared on the global product page. There are no release notes as yet and it's not been updated on the UK product page....guinea pigs beware. I won't post the link as it's not yet on the UK site but the version is 4.63.020 build 230724.

New firmware for the M series NVRs has appeared on both the UK and global product pages. The new version is 4.63.010_230619 and is linked below (Hikvision UK product page). No release notes as yet. Updating mine now and will update below if I can see any changes...

***SOLVED*** 4.63.005 appears to have broken VCA search with the NVR possible discarding VCA data sent by the camera. In Smart Playback, markers are shown automatically for pre configured events. Using the VCA search and 'Draw Line' then automatically updates the markers to reflect the...

Hik-Connect Alarm Enable Disable Issues In 4.63.000 (with Hik-Connect 5.1.x) there was an issue with the event notification enable/disable function (the bell icon in the app). The button appeared to work displaying a message that notifications were enabled/disabled but it had no effect and...

Hello Everyone. I have successfully setup my budget cctv that is suited for my use, however when I bought a new nvr with same model HWN-2104MH-4P, it comes with a more recent firmware which I cannot find anywhere in hikvision websites. The model I have is: HWN-2104MH-4P The latest firmware on...

New firmware for the M series NVR is available on the Hikvision UK website. Version 4.63.000_230412. No release notes as yet. I'm about to install it. Hopefully it'll resolve the issue with events from alarm inputs not being searchable from Custom Playback. It's available here...

Just noticed that there's some new firmware for the G5 platform cameras (G2 AcuSense and ColorVu models with C revision) 5.7.13_230403. The release notes indicate a few fixes for the not yet released dual light cameras and the addition of a human/vehicle filter within Hik-Connect (as is...

Hello, I search into the forum and i found 2 possible firmware but nether of them worked one is: HIKVISION UK PORTAL another one is:HIKVISION UK PORTAL I have: DS-7604NI-K1 / 4P(B) actual firmware version+build:V3.4.100 build 180310 And im located in EU :) Any help?

New G5 firmware appeared on the European portal yesterday along with release notes. For all DS-2CD2xx6G2 (c) and DS-2CD2xx7G2 (c) models. I've not tried it yet but there are a few fixes/new features: anti banding switch for all fixed iris models privacy zones no longer have to be rectangular...

I noticed that the dates on the portal directory for the M Series NVR had updated to December 8th but no new files are in the folder. However it seems to be that although the same firmware versions are in the directory, the build date for those versions is newer than previous. The latest...

This is my first Hikvision camera. I bought the camera DS-2CD2646G2-IZS(2.8-12mm) primarily for sharing via youtube (RTMP protocol) Firmware V5.5.801 build 210727 arrived on the camera From the page...

Hi all I write here because I have a problem with new Hikvision firmware for G5 platform. I usually use this type of cameras: DS-2CD2086G2 In the first cameras that I bought, i usually change the firmware with this version...