hikvision

HI, I am trying to send an email of a captured Licence plate when an ANPR camera captures the image using a Hikvision ANPR camera I can get an image within the email, but I want to be able to see the license plate number either in the Subject or Body. can anyone help?

Hi, Is there any way that i can setup a third stream for my Hikvision DS-7208HTHI-K2 8 Channel DVR? I have 8 x 4K / 8MP cameras that are on 4K / 8MP @ 12FPS for my main stream and then i have a sub stream set around 960 x 480 @ 6FPS. But ideally, i would like a third stream set to 1080p / 2MP...

Hi everyone, I'm new to the world of cctv. My first attempt was with Reolink and I must they worst decision but likely I managed to return it and got my refund and since then I have hikvision system. I am very impressed with g2 4mp darkfighter when I put it in color mode for night and now I'm...

Hi All, Hope you can help me. A friend has asked me to take a look at his Hikvision ds-7216huhi-k2 he has a channel DVR with 16 analog cameras plugged in but only one camera seems to be working. I can change the working camera around to other channels and it works but other cameras just state...

I keep getting this message in iVMS-4200 v1.02.03.02 on my iMac, - "Hikvision PTZ Failed Error Code libHCNetSDK.dylib[29]". The video is OK and I receive event notifications HIK-Connect ok, so don't know what it means. Can anyone explain the error code please? The Network Camera is a...

Hikvision has released new firmware for their G5 Series IP cameras. The latest firmware, Version 5.7.3, can be downloaded here. NB - you may need to refresh your browser when viewing the Hikvision portal to see the newly added version at the bottom of the list. We don't currently have full...

Hikvision has released new updated versions of the iVMS-4200 (V3.7.0.5) and iVMS-4200 AC (V1.7.0.5) software, below are the main updates in these new versions: - Supports adding events triggered by iris. - Supports drawing point cloud filter zones for avoiding false alarms. - In the original...

At the end of January Hikvision has released a new version of the Hik-Connect app - v4.21.0 Below are the main updates: - Newly supported devices: CS-LC1C-A0-1F2WPFRL, CS-C1C-F0-1E2WF, CS-C1C-E0-1G1WF, CS-C6N-D0-8B4WF, CS-C6N-D0-2C3WF, CS-C6N-B0-1G2WF - New Features for AxPro. - New Features...

So i use hikvision's 12v 5A smps (‎ DS-2FA1205-DW-IN )(i.e 60 watts) I use three DS-2CE5ADOT-IRPF each draws 4 watts max (i.e.12 watts) I want to hook up another 5mp (DS-2CE72HFT-F) which is rated to consume max 3.5 watts. So my question is can i hook it up to the existing smps or do i need an...

Hi all, I'm relatively new around here, but been lurking for some time. I was wondering if anybody could help me with a problem I'm having recently. I recently updated the firmware on my DS-7616NI-K2/16P to the latest (according to the Hikvision site i was on anyway) firmware which was...

Hi, we have a Hikvision DS-2XS6A25G0-I/CH20S40 Solar Panel Kit, the camera works fine, we can record videos and picture on a miniSD and see them by IE access and by 4G. But we cant read the microSD on the laptop, when the microSd adapter is plugged in the laptop, windows doesnt recognize the...

Recently a new open-source software vulnerability was discovered - Apache Log4j2 Issue (CVE-2021-44228) - and this was labelled as 'Critical' by the security experts that discovered it. Hikvision straight away began investigating whether this impacted any of their products, they released the...

Hi, I have a hikvision DS-2CD2146G2-ISU camera which has developed a fault. It partially works in that when turned on I am able to access the camera via http web browser but its laggy and crashes a lot. SADP tool recognises the camera. I thought it may be a firmware issue so i tried to update...

Hi All, I have recently moved into a property with a HIKvision camera system that was pre-installed by the former owner. The DVR is the DS-7608NI-K2 with 8 cameras attached to the system which worked well. However the, DVR has currently developed a fault whereby it does not power on (and from...

Hello everyone! I have just inherited a Hikvision NVR which I was successfully able to reset to factory defaults, including password. So I hooked it up to a switch in my network with subnet 10.8.150.X, the NVR gets IP parameters from DHCP according to that subnet. Next, I have a POE camera...

I had a previous post where no cameras would give a live preview (previous post). I updated the firmware of my NVR and updated the firmware of my camera. The 1 camera that was working then starting allowing live view when connecting to the NVR via the IP address. I have now got my second camera...

Is it possible to import the parameters file from an old DS-7608NI-E2/8P into the new Hikvision DS-7732NXI-I4/16P/S 32 Channel Has anyone tried this successfully? ....or partially. I'm trying to not have to set up all the cameras again if I buy this latest model.

I Have a system with a Hikvision DS-7204HUHI-K1/P with 4 DS-2CE72UF3T-E cameras. What I’m wanting to know is can the intrusion detection in smart events be set up on more than one channel. I have tried but get a box up saying “Not Enough Resources “ If my DVR doesn’t support more than one...

Hi, I have the CCTV system placed in attic and is plugged into a TPlink wifi extender which supports only 2.4ghz and a maximum of 300mbps. At times, it loses connection and I am thinking if I should invest in a wifi extender which supports 5ghz as well for better speed and performance...

Hi, There are 2x DS-9664NI-I8 Hikvision NVRs and around 120 IP cameras in our systems. The network infrastructure is installed on Huawei switches with multicast network configuration. We have problem about multiple clients monitoring IP cameras with IVMS4200 software on their computers. NVRs...