Hello everyone,
I've been trying to setup a DS-KD8003-IME1 Hikvision door phone for a customer, so they can use it for their outdoor ramp, and answer the calls through our PBX. I've got it setup at our space, connected through a SIP connection to our Samsung OfficeServ PBX.
Do the door phones have any kind of possible web interface, for looking at the camera? I've seen their cameras and other products have a web UI, but the door phone does not - the only way I've found to actually see the live feed is through their IVMS-4200 client.
And I've seen tutorials, where if a call came from the door phone, you could answer it inside the client, with the "Master Station" IP address set as the IP of the PC on which the client is installed, but I do not have a "Master Station IP" setting, only "Security Control Panel IP".
Another strange issue I've experienced is, when pressing the button on the door phone, it is set to dial the internal number 90, but for some reason it calls the number 500, which is a station group in our case, that then makes all the phones in the office ring. Anyone know what could be causing this, and where else could this be set, other than in the "Dial" menu?
I've been trying to setup a DS-KD8003-IME1 Hikvision door phone for a customer, so they can use it for their outdoor ramp, and answer the calls through our PBX. I've got it setup at our space, connected through a SIP connection to our Samsung OfficeServ PBX.
Do the door phones have any kind of possible web interface, for looking at the camera? I've seen their cameras and other products have a web UI, but the door phone does not - the only way I've found to actually see the live feed is through their IVMS-4200 client.
And I've seen tutorials, where if a call came from the door phone, you could answer it inside the client, with the "Master Station" IP address set as the IP of the PC on which the client is installed, but I do not have a "Master Station IP" setting, only "Security Control Panel IP".
Another strange issue I've experienced is, when pressing the button on the door phone, it is set to dial the internal number 90, but for some reason it calls the number 500, which is a station group in our case, that then makes all the phones in the office ring. Anyone know what could be causing this, and where else could this be set, other than in the "Dial" menu?