Motion Detection Menu on Hiwatch ip camera?

[warrendanielsmith]

Trying to set up the motion detection settings on my x2 hiwatch cameras
can anyone tell me what these settings do on the configuration menu
thank you

 

[Kyle]

Hi @warrendanielsmith

They're explained nicely in this post:

Be careful with the percentage setting.
Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the
object which can trigger the alarm. When the sensitivity is high, a very small
object can trigger the alarm.
Percentage: Range [1-100]. Percentage defines the ratio of the in-region part of
the object which can trigger the alarm. For example, if the percentage is set as
50%, when the object enters the region and occupies half of the whole region, the
alarm is triggered.
View attachment 2747
I suggest lowering the percentage to 0% for testing, you can always fine-tune later.
Scheduled settings at OFF should trigger 24/7 (mine does).

 

[warrendanielsmith]

Thank you very much well explained,I will go and have a play now..