s0ul1984
Member
- Messages
- 23
- Points
- 3
Hi and thank you very much for taking your time to read my thread. I really respect your time that you spend trying to help me.
So my issue is this. I have two cameras from Hikvision. The model is DS-2CD2386G2-ISU/SL and I also have a NVR from Hikvision, model number DS-7608NI-K2 / 8P.
What I need help with is how to make cameras take the photo of who enters the area I marked and send it to my email. I am able to setup the NVR but the images are way too small and not very clear. Before I had nvr I got sharp images via email from both cameras.
I want cameras to record and store the recording on the NVR but the images should be send to my email from camera not the NVR. Is it possible? When I connected the Cameras to the NVR I did not touch anything in network -->advance settings -->email. I left everything as it was. Now when I click Test receiver I am getting a message saying this. The network getaway is not configured, and this may cause the failure of email sending. Does it mean I have to put NVR IP on the camera or what should I do?
Thanks
So my issue is this. I have two cameras from Hikvision. The model is DS-2CD2386G2-ISU/SL and I also have a NVR from Hikvision, model number DS-7608NI-K2 / 8P.
What I need help with is how to make cameras take the photo of who enters the area I marked and send it to my email. I am able to setup the NVR but the images are way too small and not very clear. Before I had nvr I got sharp images via email from both cameras.
I want cameras to record and store the recording on the NVR but the images should be send to my email from camera not the NVR. Is it possible? When I connected the Cameras to the NVR I did not touch anything in network -->advance settings -->email. I left everything as it was. Now when I click Test receiver I am getting a message saying this. The network getaway is not configured, and this may cause the failure of email sending. Does it mean I have to put NVR IP on the camera or what should I do?
Thanks
Last edited: