NVR DS-7608NI-Q1-8P firmware upgrade failed? [error OSCVG20-0x00100573]

[amreltahan]

I am trying to upgrade my NVR device, I am getting error OSCVG20-0x00100573
Current VersionV4.75.000 build 230620
Latest Version: V4.82.100 build 240606

 

[Phil]

As the automatic update via the App doesn't seem to be working it may be best to download the new firmware and update your NVR using a PC on the same network.

The firmware can be downloaded from Hikvision's product page for your NVR here (we believe yours is a (D) model):

https://www.hikvision.com/en/products/IP-Products/Network-Video-Recorders/Pro-Series/ds-7608ni-q1-8p/

Our instructions on how to update your firmware can be found here:

How-to: Thread 'How do I update the firmware on my Hikvision camera or NVR?'

Mar 12, 2021

It is vital that you keep the firmware of your Hikvision devices up-to-date, which means installing the newest version as soon as it becomes available. The best and easiest way to do this is to use the device’s web browser interface. The below steps will show you where to find the newest firmware for your Hikvision device, and how to use the browser interface to install new firmware onto it.

---

Step 1: Check the current firmware version installed on the device.​

​

Using SADP:​

​

NB – This will not work for any device...​

• Kyle
• Replies: 0
• Forum: Guides for NVRs with V4 firmware

• 

 

[amreltahan]

Thanks for feedback, I tried from SADP, Hik-connect, web interface and isgp.hik-connect.com all tries are failed. i am going to try to connect USB with updates to the NVR and try from device again

 

[Enge56]

Hello. I have the same problem. Were you able to solve it? Do you have any idea how to do it? I can't do it either. My model is ds-7604NI-Q1/4P.

 

[amreltahan]

Hello. I have the same problem. Were you able to solve it? Do you have any idea how to do it? I can't do it either. My model is ds-7604NI-Q1/4P.

Hello, all trials failed, i am going to reset the NVR device to factory defaults and re configure it again. Does any one know how to do HW reset? i need full reset.

 

[Enge56]

Hello, all trials failed, i am going to rest the NVR device to factory defaults and re configure it again. Does any one know how to do HW rest? i need full rest.

I understand somewhere through the menu or web interface. If you manage to overcome the problem, please write. I will also write on my side if I solve this problem.

 

[amreltahan]

I understand somewhere through the menu or web interface. If you manage to overcome the problem, please write. I will also write on my side if I solve this problem.

Sure I will