Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You need to have the latest firmware version loaded (5.5.160). It's available here:Hi
I cant find the setting for white light detection on my colorvu acusence DS-2CD2347G2-LU
got audio and good color pics at night but want the white light detection to come on when event triggered
thanks
Wak
Ahh OK - I wasn't aware you were using a third party (non Hikvision NVR). If you've logged into the camera with a web browser to update the firmware, you should also be able to access all settings for the events as well and activate the feature. I have cameras with that firmware but they're not the ColorVu models so can't advise where the setting is exactly.ok i've done the firmware but still not there so must be my NVR which is a Videoteknika VN2008 / 8P
so which NVR is the better?
DS-7616NI-K2/16P - Hikvision 16 Channel NVR
DS-7616NI-I2/16P - Hikvision 16 Channel NVR
@waksat I read that the UK version of Colorvu does not support event triggered supplemental LED light. I cannot find it on my G1 colorvu.
Has that happened as a result of the firmware update process? If so it's pretty unusual. I've occasionally had cameras that have immediately brought up an "update failed" message and on rare occasions I've temporarily "lost them" completely. However on those occasions I've restored connection after a full power down (as opposed to a reboot) and been able to subsequently complete the update.Out of 8 cameras 2 of them have been bricked as of today.
In all honesty they are the first upgrades I've tried over wifi so that might be the cause. My concern is not being able to flash them or restore them now though. After the update they came back online on the NVR, but I couldn't access them through the virtual host. I then put one onto a POE switch and tried direct connection, but still couldn't connect.Has that happened as a result of the firmware update process? If so it's pretty unusual. I've occasionally had cameras that have immediately brought up an "update failed" message and on rare occasions I've temporarily "lost them" completely. However on those occasions I've restored connection after a full power down (as opposed to a reboot) and been able to subsequently complete the update.