01304 827609 info@use-ip.co.uk Find us

New profile posts

What's new Featured content New posts New resources New profile posts Latest activity
R
Hi,

Are you able to confirm if the ColorVu light can be triggered to come on via a smart event, eg Intrusion Detection?

Thank you
R
Reecek
Hi @Dan

Did you see the above message?

Thank you
Dan
Dan
Hi @Reecek

Apologies, I do not always get notified of messages left here so it is always best to just post your questions straight to the forum as someone else would have likely answered this before now.
Dan
Dan
ColorVu light operates the same way as the IR lights, so when it is dark enough the ColorVu lights will come on but there is no way to set these to be triggered by smart events. The lights can either be on full power, dimmed, or off completely. (if you already have streetlights/floodlights covering the scene)
J
Hi Phil,
The camera that i have is a DS-2CD4A26FWD-IZS/P and in its documentation it says that images can be captured at an interval of 500 milliseconds.
They say that we can configure the event-triggered snapshot and to capture the snapshot with the interval between them 500 ms. In the truth is 1000 ms.
Firmware version: V5.4.7 build 180611
Is there an option somewhere that I haven't set?
J
Hi Dan,
The camera that i have is a DS-2CD4A26FWD-IZS/P and in its documentation it says that images can be captured at an interval of 500 milliseconds.
They say that we can configure the event-triggered snapshot and to capture the snapshot with the interval between them 500 ms. In the truth is 1000 ms.
Firmware version: V5.4.7 build 180611
Is there an option somewhere that I haven't set?
Dan
Dan
Hi, can you post this issue publicly on the Hikvision manufacturer forum please - HikVision - it will take some searching for us to find the answer as we don't have one of these cameras set up and it is likely another 4A26/P user on the forum will have the answer for you much faster.
  • Like
Reactions: Jonfry
J
Jonfry
Thank you for the answer!

Could you tell me how i know if my post is really on the forum, because i press the post button after I entered the title and content and I don't know where to find my post?

Best regards,
Jon
I
Hello sir Dave, did you find a solution regarding the mainstream problem?
D
Dave Howard
Seems ok for me on pc with 4x camera showing mainstream on browser (latest ms browser Not Edge or IE)
3xposureofficial
I have recently installed a new HDD as I expanded from 2 to 3 cams. I have noticed when checking some playback (Seems to be when there is more movement) but the video either seems to jump a fair few seconds missing footage, or recently I just checked one piece of footage & it jumped back 3 - 4 seconds & continued to play. Im back on standard H264 & can see no reason for the playback to become jumpy every now and then
T
Hi can you help me with finding a desktop app to view IP cameras as a small window on the desktop without using the Hikvision software?
G
Hi, i noticed you said in a post you've got his vision to work on you nvidea shield tv, could you help me, as ive installed it on mine, but after installing its not showing up in my apps, ( don't get that ) but it is on the shield when i explore files? any help please
regards Paul
macman
macman
Unsupported apps sometimes don't show up. If you download Sideload Launcher and put it on your home page it should list all your apps in a dropdown menu and launch them.
macman
macman
G
gaza
Thanks much appreciated mate..
P
Hi
I see that you on your NVR downgraded FW from 4.x to 3.x only with reset configuration. I have 4.x onseries K and i want downgrade to 3.x. Can you tell me how do it safety ?
S
Hi,Did you find out a solution to getting WDR enabled ? As I have the same proble,and have defaulted the camera and still the same,setting failed,Thanks
D
Hi Dan,
I wanted to post on the topic "Latest HikVision Firmware for G3 Series cameras - V5.5.130", but it is blocked. I want to announce that a new version of firmware 5.5.131 has appeared for the G3 series of cameras. You can update the thread. Thx.
Dan
Dan
thank you, we were aware of this update but I think we were holding off on creating a new post about it until we had the release notes because some people don't like to update the firmware until they know what it is going to do to their device. I will chase Hikvision for the release notes and post once we have them.
Dan
Dan
We don't like to leave these kinds of posts open because users end up starting long multip-page conversation below the initial post and these are only meant as announcement posts, if you encounter an issue that you think is related to the firmware then please create a new thread.
D
doctoru30
S
Hi Dan,
I posted on Friday and it still says waiting for approval, would you mind having a look please when you get a minute?
Thanks.
Rich.
Dan
Dan
apologies, I have approved that post, some new posts get caught by our spam filter and we don't always get alerted to the ones that are awaiting approval.
3xposureofficial
Hi Dan, I dont suppose you could tell me if there is a way to set day and night profiles separately on the hikvision cameras?
Dan
Dan
Hi, If you change to scheduled-switch at the top of the image settings you should be given 3 options - Common/Day/Night

Common settings apply to both day and night and obviously the settings you set in the day tab only affect the colour day images, while the settings in the night tab only affect the camera's performance when using IR.
3xposureofficial
3xposureofficial
Thanks that makes sense, although the annoying thing is you cant have it on auto switch with custom day/night settings? (Basically I want to auto switch because of day light saving and the likes)
M
Hi, what NVR are you using? I've a DS-7608NI-K2 / 8P but it doesn't have the magic one-key disarm feature. Looking to see if it's only I series which have....Thanks!
V
Vernon
I also have a DS-7608NI-K2 and the one-key disarm feature is grayed out so I cannot tick it. Can anyone tell me how I can get it working.......Thanks
Snaffy
Thanks for the interesting post.
Just wanted to say that here as didn't really feel should be saying much about Reolink as it's not a product supported by those who run the forum and did not wish to steer a thread off-track.
J
Hi, did you manage to get your dvr password reset. I'm in a similar situation and wondered How orbif you did it?
Thanks
S
I'm posting my email in a format that web scrapers can't easily extract: stewmon at gmail dot com. Do the same with yours if you'd like me to assist.
Back
Top